User Tools

Site Tools


wiki:troubleshooting:step_0

Internet Troubleshooting

Initial Diagnostic Procedure

Please complete the following checks before contacting support. These steps resolve most common internet connectivity issues.


1. Equipment Verification

Confirm the following:

• Router is powered ON
• Power cable is securely connected
• WAN / Internet cable is properly inserted
• No loose Ethernet cables
• Router indicator lights appear normal

2. Service Status Check

• Test internet using mobile data
• Check for any scheduled maintenance announcements

If multiple homes are affected, the issue may be an ISP outage.


3. Device-Level Verification

• Restart the affected device
• Disconnect and reconnect to Wi-Fi
• Test using another device (phone or laptop)

If only one device is affected, the issue is likely device-related.


4. Router Restart Procedure

Follow this sequence carefully:

1. Turn OFF the router
2. Wait 2–5 minutes
3. Turn ON the modem (if separate)
4. Wait until fully connected
5. Turn ON the router
6. Wait for indicator lights to stabilize

5. Basic Network Test

For advanced users:

Open Command Prompt and run:

ping 8.8.8.8
ping google.com

If 8.8.8.8 fails → No internet connectivity.


6. Support Escalation

Contact Matrix Data Network Support if:

• WAN / Internet light is OFF
• Internet is down for more than 30 minutes
• Multiple neighbors are affected
• All steps above have been completed without resolution

Network Operations Center Phone: +961 3324903


If your connection is up but unstable or slow, continue to Network & Connection Troubleshooting. If this is a billing/account issue, go to Billing & Account Services. Still stuck after troubleshooting? Go to Support Center.

wiki/troubleshooting/step_0.txt · Last modified: by 127.0.0.1